Stainless Steel 316 Tee

Stainless Steel 316 Tee Manufacturers & Suppliers

 

Email : piyushsteel@gmail.com

              export@piyushsteel.com

PIYUSH STEEL provide Stainless Steel 316 Tee in stainless steel. It is mainly used to reduce delivery lines such as 3/8" to 1/4" to feed ice makers. Stainless Steel 316 Tee is available in different specifications and measures to suit the requirements of other applications.

Features :

• Dimensional accuracy
• Leak proof
• Long service life
• Corrosion resistance
• Fine finish

The structural material for the first wall and blanket of a fusion device must be of excellent integrity with well known and established properties since it will be subjected to radiation damage levels ~10^-7 dpa/s, will be expected to operate at temperatures in the range of 100-600 C and for pulsed machines will be subject to damage caused by thermal fatigue as a result of the cyclic strains produced by the temperature changes during intermittent burning of the plasma.
PIYUSH STEEL of the Stainless Steel 316 Tee type has been selected as a potential structural material for near term fusion experimental devices. PIYUSH STEEL Stainless Steel 316 Tee has been studied in many nuclear environments, therefore a substantial amount of data is available.
Compatibility
The compatibility of stainless steel with coolant materials has been judged almost exclusively in terms of the "wastage" or thinning of the material. On this basis a corrosion rate of approximately 25 um/year (~1 mpy) is actually taken as the acceptable upper bound for blanket or coolant compatibility.
Compatibility with liquid lithium is under question principally because the available corrosion data for lithium are limited. The compatibility of sodium with PIYUSH STEEL is more feasible than that of lithium. Helium as an inert coolant provides no compatibility problems.

GENERAL PROPERTIES - Stainless Steel 316 Tee
Chemical composition of 316ss stainless steel (wt %)

  C    Si     Mn     P      S      Cr     Ni     Mo     Ti     N       Al     Co     Nb     
0.055  0.75   1.5    0.02   0.004  16.4   13.9   2.3    0.08   0.0084  0.021  0.013  0.06   

Physical Properties
Density : 7.96 g/cm³
Melting Point : 1370 - 1400 C
Electrical Properties
Electrical Resistivity : 70 - 78 u [[Omega]] cm
Thermal Properties
Coefficient of Expansion @ 20 - 100 C : 16 - 18x10^-6 m/m-K
Thermal Conductivity @ RTP : 16.3 W/m-K
Mechanical Properties
Brinell Hardness : 160 - 190
Elongation : < 60 %
Izod Impact : 20 - 136 J m^-1
>Modulus of Elasticity : 190 - 120 GPa
Tensile Strength : 460 - 860 MPa

PIYUSH STEEL supply Stainless Steel 316 Tee that is designed in conformation with international quality standards. Available in different specifications, the tee is used for changing the direction of fluid, which flows through pipe. The entire range of dairy fittings offered by us includes Bend (Long & Short), Elbow (180 Deg., 90 Deg. & 45 Deg.), Tee (Equal & Unequal), Reducer (Concentric & Eccentric), Union Clamp With Ferrule, Clamp (Pipe Holding) with Coupling, CAP, Stubend (Long & Short), Nipple (Barrel).

Features :

• High strength
• Dimensional accuracy
• Durable
• Corrosion resistance
• Perfect finish

Specifications :

• Range 15 NB to 100 NB in Standard: SMS, IDF, DIN, ISO
• Type Bend (Long & Short)
• Elbow (180 Deg., 90 Deg. & 45 Deg.)
• Tee (Equal & Unequal)
• Reducer (Concentric & Eccentric)
• Union Clamp with Ferrule, Clamp (Pipe Holding)
• With Coupling, CAP, Stubend (Long & Short)
• Nipple (Barrel)
• Stainless Steel in Grade ASTM A 403 WP - TP 304, 304H, 304L, 304LN, 316, 316H, 316L, 316LN, 316Ti, 309, 310, 317L, 321, 347, 904L
• Specialize Finish: Dairy Polished, Electro Polished, 320 Grit.

Type: Equal Tee

Model: SS 316
Materials: Stainless Steel SS 304, 304L, 321, 316, 316L, 347H, 317L, 310S and 904L
Manufacturing standards: ANSI, ISO, JIS and DIN
Size range: from 1/2 to 56 inches
Wall Thickness: SCH5 to SCH160